Dwl-g810 setup

Wanted to post this for all those who may wish to do the same, but don't know how, or are running into trouble configuring the equipment. My network looks like this: Sat MdmDI I've shown only 1 link, but I actually run 2 such links. The other one is structured the same way, except it goes about feet. The long distance links use 2 antennas: ANT - one on the tranmitting end of the DI, and one on the receiving end of the G Although the antenna is directional, the sidelobes of the DI antenna also feed some local wireless computers with no problem.

The router is set-up per quick set-up guide. The 1'st DI is configured normally as well - nothing unusual, other than the "remote management" is enabled on port The second DI is set per default as well, except it used a different channel, and different SSID from the 1'st one. WLANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities.

Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN.

Management decisions based on real-time information can significantly improve worker efficiency. Networks that frequently change can benefit from WLANs ease of implementation.

WLANs can operate in locations where installation of wiring may be impractical. Installation and Network Expansion - Installing a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Wireless technology allows the network to go where wires cannot go - even outside the home or office.

Scalability — WLANs can be configured in a variety of ways to meet the needs of specific applications and installations. Configurations are easily changed and range from Peer-to-Peer networks suitable for a small number of users to larger infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed.

Inexpensive Solution - Wireless network devices are as competitively priced as conventional Ethernet network devices. The DWL-G is compatible with The IEEE It increases the data rate up to 54 Mbps within the 2. This means that in most environments, within the specified range of this device, you will be able to transfer large files quickly or even watch a movie in MPEG format over your network without noticeable delays.

This technology works by transmitting high-speed digital data over a radio wave utilizing OFDM O rthogonal F requency D ivision M ultiplexing technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then transmitted simultaneously at different frequencies to the receiver. OFDM reduces the amount of crosstalk interference in signal transmissions.

The D-Link DWLG will automatically sense the best possible connection speed to ensure the greatest speed and range possible. The DWL-G is backwards compatible with This means that if you have an existing Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range.

Typical ranges vary depending on the types of materials and background RF radio frequency noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:. Position your devices so that the number of walls or ceilings is minimized.

A wall that is 1. At a 2-degree angle it looks over 42 feet 14 meters thick! Position devices so that the signal will travel straight through a wall or ceiling instead of at an angle for better reception.

Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials. Ad-Hoc — directly connecting to another computer, for Peer-to- Peer communication, using wireless network adapters on each computer, such as two or more DWL-G Wireless Network Adapters. This example illustrates an Ad-Hoc setup. Welcome to ManualMachine. We have sent a verification link to to complete your registration.

Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Contents Package Contents System Requirements for Configuration: A computer or laptop with an Ethernet adapter.